Asante Technologies 8000 - Manual (Page 88)

Configuration
Page 3-54
Figure 3-30 Port Statistics Counters since system up
3
Use the s command to select a port for which you want to
see the counters, or use n and p to find the port.
4
Use the g command to select a different module (group)
in which you want to select a port, or use x and v to find
the module.
5
Type t to stop the periodic updating of the counters, so
you can record what they are at that time.
6
Type r to see a display of the same counters, but accrued
since the last reset of the counters, as shown in Figure 3-
31.
IntraCore 8000 Port Statistics Counters Module: 2 Port: 1
Elapsed Time Since Up: 000:00:00:55
<Counter Name> <Total> <Avg./s> <Counter Name> <Total> <Avg./s>
Total RX Pkts 1474 26 Total RX Bytes 116246 2113
Dropped Pkts 185 3 Good Broadcast 57 1
Good Multicast 6 0 Undersize Pkts 0 0
Oversize Pkts 0 0 CRC/Align Errors 0 0
Fragments 0 0 FCS Errors 0 0
Collisions 0 0 Late Events 0 0
64-Byte Pkts 283 5 65-127 Pkts 1174 21
128-255 Pkts 12 0 256-511 Pkts 5 0
512-1023 Pkts 0 0 1024-1518 Pkts 0 0
<Cmd> <Description> <Cmd> <Description> <Cmd> <Description>
r since reset x next module n next port
t stop refresh v prev module p prev port
q quit g select module s select port
Command>