Asante Technologies 8000 - Manual (Page 156)

Web Browser Management
Page 5-16
Figure 5-14 VLAN Group Configuration options
Creating or Modifying a VLAN
To create or modify the basic attributes of a VLAN group, click the Create
or Modify button in the VLAN Group Configuration dialog box. The
VLAN Attributes dialog box is displayed, as shown in Figure 5-15.
Figure 5-15 VLAN Attributes dialog box
Enter or change the basic attributes, then click OK.
Removing a VLAN
To remove a VLAN from the current switch, click Remove in the VLAN
Group Configuration dialog box. This removes the VLAN you selected at