Auerswald 461.2 - Manual (Page 12)

Getting started
12
Getting started
Parts supplied
Your Voicemail Center 461.2 package contains:
• Voicemail Center 461.2
• Telephone connection cable RJ-11 (6P/4C) to RJ-11 (6P/4C)
• Adapter RJ-11 to TAE
• Auerswald Mega Disk
• Mains plug 11.5V / 350 mA
• 2 transfer cables pin/pin and pin/cinch
•
Manual for Operation with Auerswald PBX systems
Installation
Your Voicemail Center 461.2 has been produced for normal operating conditions.
Solutions in furniture varnish, cleaning oils or paint cleaners can loosen the base.
Bases that have been altered in this way may leave tracks behind on the furniture.
Therefore use a non-slip underlay especially for new or freshly treated furniture.
Connecting
Before you can use your Voicemail Center 461.2 you first need to connect all the
necessary cables.
1 Fit the small connector of the mains plug into the "POWER" jack and the plug
into a 230 V socket outlet.
2 Fit the small connector of the telephone connection cable into the "LINE" jack
and the other connector into the telephone socket.
3 If you want to transfer incoming messages to an external medium fit the trans-
fer cable with the jack plug to the "OUT" socket and the cinch plug to the au-
dio input on the external device (audio system, cassette recorder etc.).