Auerswald 461.2 - Manual (Page 43)

Remote access
43
Message transfer function
Changing the 1st call number for
message transfer (only the first num-
ber can be changed)
Press * and 9 in succession. The first current call number is an-
nounced. Next comes the request to enter
a new call number.
Enter new call number.
For special symbols press the follow-
ing buttons in succession: Each digit is confirmed.
= Wait for dial tone / 3 Sec. pause
= Flash (short)
= Internal
= Hook flash (long)
= S (send by SMS)
= *
To delete the call number
Press * and 7 in succession. The call number is deleted.
To accept the call number
Press * and 8 in succession. The new call number is played back for
checking.
Call forwarding function
Activating call forwarding
Press * and 1 in succession The current target call number is an-
nounced. Next comes the request to enter
a new target call number.
Enter the new target call number.
For special symbols press the follow-
ing buttons in succession:
Each digit is confirmed.
= Wait for dial tone / 3 Sec. pause
= Flash (short)
= Internal
= Hook flash (long)
= *
To delete the target call number
Press * and 7 in succession. The target call number is deleted.