Auerswald 461.2 - Manual (Page 83)

Settings
83
line.
Change the settings using the con-
trol buttons (up/down). The display counts up or down.
For settings with several digits
move the entry location to the re-
quired location using the control
buttons (left/right). The selected entry location flashes.
To end digit entry press the selec-
tion button next to the desired line
again. The entry location stops flashing.
To stop the entry press stop several
times. The initial state is again displayed.
Adjusting the volume
You can set the volume when the device is in the initial state.
Set the volume using the control
buttons (left/right). The volume bar shows the current set-
ting.