MSI Z77 MPOWER - Manual (Page 92)

B-12
Intel RAID
Degraded RAID Array
A RAID 1, RAID 5 or RAID 10 volume s reported as degraded when one of ts hard drve
members fals or s temporarly dsconnected, and data mrrorng s lost. As a result, the
system can only utlze the remanng functonal hard drve member. To re-establsh
data mrrorng and restore data redundancy, refer to the procedure below that corre-
sponds to the current stuaton.
Mssng Hard Drve Member
Make sure the system s powered off.
Reconnect the hard drve.
Reboot the system to Wndows; the rebuld wll occur automatcally.
Faled Hard Drve Member
Make sure the system s powered off.
Replace the faled hard drve wth a new one that s of equal or greater capacty.
Reboot the system to Intel RAID Opton ROM by press <Ctrl> and <I> keys smul-
taneously durng the Power-On Self Test (POST).
1.
2.
3.
1.
2.
3.
Select the port of the destnaton dsk for rebuldng, and then press ENTER. 4.
RAID Volumes
ID Name Level Strp Sze Status Bootable
0 Volume0 RAID 1(Mrror) N/A XXX.XGB
Degraded Yes
Physcal Dsks:
Port Devce Model
Seral # Sze Type/Status(Vol ID)
1 XXXXXXXXXXXXX XXXXXXXXXXXXX XXX.XGB Member Dsk (0)
2 XXXXXXXXXXXXX XXXXXXXXXXXXX XXX.XGB Member Dsk (0)
Press <CTRL-I> to enter Configuraton Utlty..
DISK / VOLUME INFORMATION [ ]
4. Recovery Volume Optons
4. Recovery Volume Optons
5. Ext
RAID Volumes :
None defined.
Physcal Devces :
Port Devce Model Seral # Sze Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Dsk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Dsk
[ ↑↓] - Select [ESC] - Ext [ENTER] - Select Menu
1. Create RAID Volume
2. Delete RAID Volume
“Degraded” volume and dsk avalable for rebuldng detected. Selectng
a dsk ntates a rebuld. Rebuld completes n the operatng system.
[ ] DEGRADED VOLUME DETECTED
Select the port of the destnaton dsk for rebuldng (ESC to ext):
[ ↑↓] - Prevous/ Next [ENTER] - Select [ESC] - Ext
Port Drve Model Seral # Sze
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
[ ] MAIN MENU