Axis Communications 243SA - Manual (Page 35)

35 AXIS 243SA - Event configuration
Camera tampering
The camera tampering application generates an alarm whenever the camera is
repositioned, or when the lens is covered, sprayed, or severely defocused.
You must create an event, (see “How to set up a triggered event” (page -31)), for the
camera to send an alarm.
Motion detection
In the Motion Detection menu, you can configure the video source(s) for motion detection.
The motion detection feature is used to generate an alarm whenever movement occurs (or
stops) in the image. AXIS 243SA can use up to 10 motion detection windows.
• Include windows target specific areas within the image
• Ex
clude windows are areas to be ignored within the Include window
Once configured, the motion detection windows will appear in a list when motion
detection is selected to trigger an event. See How to set up a triggered event above.