Axis Communications 243SA User Manual
Page 40
40
AXIS 243SA - Pan Tilt Zoom
G
uard tour
A guard tour moves between chosen Preset Positions, one-by-one, in a pre-determined
order or at random, and for configurable time periods. Unlike the Sequence Mode, which is
a viewing application under Live View Config (see Live View Config, on page 28), the
guard tour sequence will keep running, after the user has logged off or closed the browser.
Advanced
Device Settings - The device settings window is for driver specific settings, so the
appearance of this window can vary depending on the driver installed. Options that can be
configured include: Driver Specific Settings for Video Source 1, Mechanical Limits for
Moving Video Source 1, Light Control for Video Source 1, and Extended Driver Specific
Settings for Video Source 1.
Ctrl Panel - The Panel View Settings window contains tools for creating and saving short
command buttons that are located under the Control panel. These buttons provide direct
access to various built-in auxiliary commands provided by the PTZ driver and are
displayed in the PTZ Panel.
Limits - Define the pan, tilt, zoom and focus limits for the Axis video server. Movements
to the left and right, up and down can be restricted to narrow the area under surveillance.
The near focus limit can be set to avoid focusing on objects too close to the camera.
Note:
To be able to set limits, the driver needs to be an “absolute” driver.’