Aiwa XR-MN5 - Manual (Page 18)

18
En
5 Press SYNCHRO REC.
The unit enters the recording pause mode, and "REC"
indicator flashes on the display.
6 Press REC START/REC PAUSE to start recording.
"REC MUTING" flashes in the display for 10 seconds
and recording starts.
When only a track is to be recorded, CD playing returns
to the beginning of the current track and recording starts.
•Volume or tone adjustment(s) (except i-Bass) does not affect
recording.
•i-Bass tone adjustment does affect recording.
•"No Tab" is displayed if you attempt to record a tape with
the tab broken off.
To record a selected set of tracks from a CD
Program the desired tracks (see "Programed play" on page
11) and then press SYNCHRO REC.
To record radio programs and
external equipment
Use only type I (normal) tapes.
1 Press PUSH EJECTz to open the cassette holder.
2 Insert the recordable tape.
3 Hold down SHIFT and press REV MODE on the
remote repeatedly to select the reverse mode.
4 Prepare the source.
To record radio programs, press TUNER/BAND and tune
in the desired station.
To record from connected external equipment, press AUX
and prepare the equipment.
5 Press REC START/REC PAUSE twice to start
recording.
When recording input from connected equipment,
manually start playback of the source.
Recording from CDs can also be made in this way.
To do that, start the playback of the CD in step 4.
To stop recording
Press s.
To pause recording (only for TUNER or AUX source)
Press REC START/REC PAUSE. Press again to resume.
To record a CD
Use only type I (normal) tapes.
1 Press PUSH EJECTz to open the cassette holder.
2 Insert the recordable tape.
Insert with the exposed side down, and the side to be
recorded on first facing out from the unit. Press PUSH
EJECTz to close the cassette holder.
3 Hold down SHIFT and press REV MODE on the
remote repeatedly to select the reverse mode.
To record on one side only, select p.
To record on both sides, select [.
If selecting "]" mode in this step, the reverse mode
changes to "[" when starting recording.
4 Press FUNCTION on the remote repeatedly to
select the CD function, and load the disc.
To record only one track, start play of the track.
TAPE RECORDING
s
SHIFT
REV MODE
s
REC START/
REC PAUSE
SYNCHRO REC
CD EDIT/
CHECK
FUNCTION
f,g
PUSH
EJECTz