Aiwa XR-MN5 - Manual (Page 8)

8
En
ADJUSTMENTS BEFORE OPERATION
ECO/RDS
CLOCK
POWER
DIMMER
SHIFT
ECD,
TUNER/
BAND,
dTAPE,
AUX
f,g
POWER
6STANDBY/ON
ECD,
TUNER/
BAND,
dTAPE,
AUX
ENTER
f,g
ECO mode
Reduces power consumption in standby mode with the following
operations.
Press ECO/RDS.
Each press of the button changes the mode as follows;
ECO ON: Power economizing mode is activated.
When the unit turns off, everything on the display clears and
only the red indicator above POWER lights to show that the
power is being supplied.
ECO OFF: Power economizing mode is cancelled.
When the unit turns off, the clock display appears.
Initial mode is ECO OFF.
Standby power consumption
ECO ON: 0.26 W
ECO OFF: 15 W
Setting the clock
1 In stop mode, hold down SHIFT and press CLOCK
on the remote.
Go to step 3 when the hour of the clock display flashes.
2 Within 6 seconds, press ENTER.
The hour flashes in the display.
3 Press f or g to set the hour, then press
ENTER.
4 Press f or g to set the minute.
Each press changes the time in 1-minute steps.
5 Press ENTER.
The time display stops flashing and the clock starts from
00 seconds.
To display the time while the power is on
Hold down SHIFT and press CLOCK on the remote.
The time will be displayed for 6 seconds.
If "- -:- -" appears when the unit is turned off
There has been a power interruption. Reset the clock.
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote ).
Alternatively, press dTAPE, TUNER/BAND, AUX, ECD
or one of the CD slot buttons (1-5). Playback will start
automatically if a disc or tape is loaded.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
Dimmer
The display window brightness can be selected.
Press DIMMER on the remote.
Each press of the button changes between darker and brighter.