Avaya NN42030-102 - Manual (Page 15)

Software installation
Avaya 3100 Mobile Communicator - Client for Nokia User Guide 15
Software installation
This section describes how to install, upgrade, and uninstall the Avaya 3100 Mobile Communicator - Client
(Avaya 3100 MC - Client) for Nokia on a supported Nokia device. There are two ways to install or upgrade
the Avaya 3100 MC - Client for Nokia: from a computer or over the air.
Before you install or upgrade the Avaya 3100 MC - Client for Nokia software from a computer, ensure that
your Nokia device and your PC are connected using a Universal Serial Bus (USB) cable and ensure that
Nokia PC Suite software is installed on your PC.
Note 1: Ensure that your device has the correct date and time.
Note 2: In some cases, it is necessary to remove the existing software components prior to performing
an upgrade. Check with your system administrator or read the release notes before proceeding with an
upgrade.
Note 3: If you are upgrading from an earlier release, you must perform an initial software installation,
not an upgrade. After reinstalling the software, change the Avaya 3100 Mobile Communicator
Gateway address on the Systems Settings screen if instructed to do so by your system administrator.
Note 4: If you wish to use Hypertext Transfer Protocol Secure (HTTPS) with certificates, you should
install the certificate prior to installing the Avaya 3100 Mobile Communicator - Client.
Use the following procedures to install, upgrade, and uninstall the Avaya 3100 MC - Client for Nokia
software.
• “Installing the Avaya 3100 MC - Client for Nokia software from a computer” on page 15
• “Installing the Avaya 3100 MC - Client for Nokia software over the air” on page 16
• “Upgrading the Avaya 3100 MC - Client for Nokia software from a computer” on page 17
• “Upgrading the Avaya 3100 MC - Client for Nokia software over the air” on page 18
• “Moving the Avaya 3100 MC - Client for Nokia icon to the menu screen” on page 19
• “Uninstalling the Avaya 3100 MC - Client for Nokia software” on page 19
• “Installing security certificates” on page 19
Installing the Avaya 3100 MC - Client for Nokia software
from a computer
You can use your desktop PC or laptop to install the Avaya 3100 MC - Client software. After downloading
the latest software load, you install it on your Nokia device using a USB connection.
Before installation, install the Nokia PC Suite on your computer and configure the device with the correct
date and time.
The following procedure details the steps required to install the Avaya 3100 MC - Client for Nokia software
from a computer.
A zipped file contains the Avaya 3100 MC - Client for Nokia software and documentation. Extract the
contents of this file to a folder on your computer before you install the software.