Avaya NN42030-102 - Manual (Page 26)

Avaya 3100 MC - Client for Nokia configuration
26 NN42030-102 Avaya 3100 Mobile Communicator 3.1 Standard 04.05 October 2010
Configuring your Call Settings
Use the Call Settings pane to select a call screening mode and configure the instant conference
notification period.
Configuring your call settings
1. From the Avaya 3100 MC - Client for Nokia main pane, select Settings.
2. From the Settings pane, select Call Settings.
3. Complete the fields on the pane using the information in the following table as a guide.
Logging Level There are five logging levels:
• Error: Only critical issues are logged.
• Warning: Only critical and major issues
are logged.
• Info (Default): Critical, major and minor
issues are logged.
• Debug: Developer debug information. Not
recommended for normal operation.
• Max: All logs types turned on.
Show Signals Displays the signal strength of the WiFi
network on the dashboard.
Table 7: Call Settings pane fields
Field Settings
On Incoming Calls Select a call handling mode:
• Show Client Alert (Default): Incoming
calls over the cellular network trigger an
alert. You must acknowledge the screen
pop-up to accept or decline the call. The
incoming cellular call is auto answered on
your behalf.
• Show Nokia Alert : Incoming calls
immediately forward to your cell phone,
and a message displays that the call has
been accepted and you must answer the
incoming call.
Avaya recommends that you configure Show
Client Alert in the following conditions:
• you use a password to lock your screen.
• you use a Bluetooth headset to accept
your incoming calls.
Table 6: Application Settings pane fields
Field Settings