Lenovo ThinkServer RD530 User Manual
Page 135
Advertising
8. Carefully lift up the hot-swap hard disk drive backplane. When the hooks
1
are aligned with the
holes in the backplane, slowly move the backplane a little bit outward. Then, completely remove the
hot-swap hard disk drive backplane.
Figure 82. Removing the hot-swap hard disk drive backplane
9. Touch the static-protective package that contains the new hot-swap hard disk drive backplane to any
unpainted surface on the outside of the server. Then, remove the new backplane from the package.
Note: Carefully handle the backplane by its edges.
Chapter 6
.
Installing, removing, or replacing hardware
123
Advertising