Lenovo ThinkServer RD530 User Manual
Page 96
8. Grasp the RAID card by its edges and gently slide the RAID card out of the RAID card retention bracket
and the riser card assembly 2.
Note: The RAID card might fit tightly into the PCI Express card slot. If necessary, alternate moving each
side of the RAID card a small and equal amount until it is completely removed from the slot.
Figure 42. Removing the RAID card
9. Touch the static-protective package that contains the RAID card to any unpainted surface on the outside
of the server. Then, take the RAID card and the low-profile bracket out of the package.
Note: Carefully handle the RAID card by its edges.
10. Remove the two screws from the RAID card and then remove the full-height bracket from the RAID card.
Figure 43. Removing the full-height bracket from the RAID card
84
ThinkServer RD530 User Guide