Alamo JD-5225 - Manual (Page 70)

© 2005 Alamo Group Inc. Section 8 - 2
Switchblade (JD-5105-5205-5225-5325-5425-5525 Asy. Man.)05/05
Mount Kit Component Identification
John Deere
5425/5525 CAB & ROPS/2&4wd w/Flat Platform
As Of: 03-25-05
Front Tires:
11.2-24 (R-1) Max front tire
Rear Tires:
16.9-30 (R-1) Max rear tire
Mount Kit: ROPS Flat (IOOS) Platform Only
Subframe Kit ………………………………………………….....02982523
Hydraulic Kit ………………………………………………......... 02982524
Mount Kit: Cab Only
Sub-frame Kit ……………………………………..................... 02982523
Hydraulic Kit …………………………………………………......
02983229
Important Note:
1. The ROPS mount kit has been designed to fit tractors equipped with an “isolated open operator
station (IOOS)” (ie: flat platform). The dealer/customer is responsible for any required modi-
fications for mounting tractors equipped with a “straddle mount operator station” instead.
2. The right hand step must be removed for lift carriage clearance. Ingress/egress on the right
is otherwise blocked by the control stand.
3. If the tractor is equipped with a mid-mount valve, it may also need to be moved for clearance
reasons. Mid - Mount Valve Is a Tractor Mounted Option where aux vlave is mounted on the RH
side of tractor behind RH step. Cab models should clear butmodification may be required by
installer at customer or dealer exspense.
4. First cut from tractor center line for a right hand cutterbar is 54".
(1) isolated open operator station (flat platform).
Flat Operators
Platform
(2) The right hand step must be removed .
The right hand
step has been
removed