Alamo JD-5225 - Manual (Page 85)

© 2005 Alamo Group Inc. Section 8 - 17
Switchblade (JD-5105-5205-5225-5325-5425-5525 Asy. Man.) 05/05
Pump / Driveline Schematic - 5425 & 5525 CAB/ ROPS
Drive Shaft, 3/4" w/ 3/16"
Keyway X 7/8" w/ 13 spline
Tractor Engine Pulley
Pulley Adapter,
Pump Drive Schematic:
This Section covers the installation of Pump Drive Components, Pump Assembly. There are
some precautions that must be followed during the assembly process before unit is ever started for the
first time, Read the entire section on start up proceddures before starting tractor. Starting Tractor with
pump dry will damage pump.
1234
1234
1234
1234
12345
12345
12345
12345
12345
12345
12345
12345
12345678
12345678
12345678
12345678
12345678
12345678
7/8" X 13 Spline 3/4" w/ 3/16" Keyway
Coupling Flange, P/N 0062000 ( 3/4" Bore
w/ 3/16" keyway, 1/4" setscrew )
12345
12345
12345
12345
12345
12345
12345
12345
12345
Flange, P/N 02974359 ( 5/8" Bore
w/ 9 Spline ) Center Coupling, w/ Nut & Bolt Set
Flange Mounting Bolts
& Locknuts (4 ea.)
12345
12345
12345
12345
12345
12345
Pump Mount,
12345
12345
12345
12345
12345
12345
12345
Pump Assembly
P/N 02973992
Hub, P/N 02702900
P/N 02979436
P/N 02982530
Use Existing Bolt & Lockwasher
From Crankshaft Pulley
( 4 ea.)
Bolts, P/N 02976344
Lockwasher, P/N 00022200
( Included W/ Center Coupling )
Hub
Bolts, P/N 02975692
Lockwasher, P/N 02971158
( Set Of 4 ea. )
Bolts, P/N 00023100
Locknuts, P/N 00015800
Setscrew, P/N 02957080