AGFA CL30 - Manual (Page 27)

ePhoto CL30 User’s Guide 27
Changing Advanced Settings
Date & Time
Each image is tagged electronically with the date and time it was
taken so it is important to make sure that the date and time are set
properly.
The date is shown in the following format: mm/dd/yyyy
(month/day/year). The time uses a 24-hour clock.
To set the date and time:
1. Select Date & Time in the Advanced menu. The SET DATE &
TIME screen appears with the arrow pointing to the date.
2. If you want to change the time on the next line, turn the EasyPi-
lot button to move the arrow down.
3. Press the EasyPilot button to underline the first item in the line.
4. If you want to change the value, turn the EasyPilot button.
5. Press the EasyPilot button to select the value.
6. Continue to turn and press the EasyPilot button to set the date
and time (using a 24-hour clock).
7. Select Set to confirm the date and time or Exit to leave them
unchanged.
RS232 Speed
If you have problems transferring images to your computer, it may
be that your computer cannot handle the speed at which the camera
transfers images. You can use this option to change the transfer
speed of the camera. The RS232 speeds available are:
◗ 9600
◗ 19200
◗ 38400
◗ 115200 (the default)