AGFA CL30 User Manual
Page 42
42
ePhoto CL30 User’s Guide
Troubleshooting
The recorded
image is blurry.
The subject moved while you were taking the
picture. Hold the camera steady and take the
picture again.
You moved the camera while you were taking
the picture. Take the picture again and hold
the camera steady as you depress the shutter
button.
You used the wrong focus setting.
Make sure
the subject’s distance from the lens and the
focus setting match. The flash illuminates
subjects up to a distance of only about 10
feet (2.6 m).
You manually set the shutter speed too low.
Increase the shutter speed manually.
The recorded
image is too
dark.
There was not enough light. Set the flash to
the Auto or Fill-in setting.
The subject was too far away for the flash.
The flash illuminates subjects up to a dis-
tance of only about 10 feet (2.6 m).
You selected an incorrect advanced setting.
Readjust the setting or set it to automatic.
You can also use PhotoWise to adjust the
brightness and contrast of your image.
Problem
Possible Cause/Solution