AGFA CL30 - Manual (Page 43)

ePhoto CL30 User’s Guide 43
Troubleshooting
The recorded
image is too
bright. If the flash was in the Fill-in mode, there was
too much light.
Change the flash setting to
Auto.
The camera was pointed directly at a bright
light. Take the picture from a different angle.
You can also use PhotoWise to adjust the
brightness and contrast of your image.
You selected an incorrect advanced setting.
Readjust the setting or set it to automatic.
You were too close to the subject (i.e.,
Macro) to use the flash.
Turn off the flash
and take the picture again.
The wrong date
and/or time are
displayed. The date and time are incorrectly set. Set the
correct date and time.
PhotoWise can’t
find the camera. The camera is off. Slide the Mode switch to
PLAY or REC.
The serial cable is connected incorrectly.
Check the cable and connections.
The batteries are too weak. Replace them.
The serial port setting is incorrect. Your PC’s
serial port should be dedicated to the ePhoto
CL30. If your computer is running other soft-
ware packages in the background that peri-
odically check the serial port (e.g., personal
digital assistants), turn those programs off.
There is an internal device conflict in your
computer. Check the documentation that
came with your computer and/or Windows.
Problem Possible Cause/Solution