AGFA CL30 - Manual (Page 40)

40 ePhoto CL30 User’s Guide
Troubleshooting
T ROUBLESHOOTING
If you have a problem using your ePhoto CL30, review this section
first. If you cannot find the solution to your problem here, visit Agfa
on-line at www.agfahome.com/ephoto or check with your dealer.
Problem Possible Cause/Solution
The camera has
no power. The camera is turned off. Slide the Mode
switch to REC or PLAY.
The camera is inactive due to the automatic
power down feature. Press the EasyPilot but-
ton to turn it back on.
The camera is connected to a computer (the
light next to the lens is blinking). The camera
has power, but can be controlled only from
the computer.
The batteries are too weak. Replace them. If
you are using the optional Agfa AC adapter,
make sure it is securely plugged into a work-
ing outlet.
The shutter but-
ton doesn’t work. The camera is still saving a picture. Wait for
the live image to appear on the LCD.
The camera is in PLAY. Turn the Mode switch
to REC.
The memory card is full (flashing card icon
on the Status Display). Download the images
to your computer, delete some or all of the
images, insert a different memory card or
lower the resolution.
The camera is connected to a computer. The cam-
era can be controlled only in PhotoWise.