Konica Minolta bizhub 282 - Manual (Page 288)

Application functions 8
362/282/222 8-17
App
lica
tio
n f
unct
ions
Chapter 8
– If “Inch (Fraction)”
was selected as the
measurement units,
touch [X] or [Y] to po-
sition the cursor in
the input box, and
then touch
or
to specify the
length.
– A value outside the
allowable range can-
not be entered.
– To change the en-
tered value, press
the [C] (clear) key, and then enter the correct value.
– If the “Image Repeat” function is registered with a program, both
standard sizes and non-standard sizes can be registered. For de-
tails on registering programs, refer to “Registering copy programs
(Mode Memory)” on page 4-8.
7
Touch [Enter].
8
Touch [Enter], and then touch [Enter] in the next two screens that ap-
pear.
9
In the Basics screen,
touch [Paper], and then
select the paper tray
loaded with the paper.
10
Specify any other desired copy settings.
11
Using the keypad, type in the desired number of copies.
12
Press the [Start] key.
Copying begins.
<Custom Size screen>