Konica Minolta bizhub 282 - Manual (Page 64)

Before making copies 2
362/282/222 2-15
Be
fo
re
m
a
king
c
o
p
ie
s
Chapter 2
7 [Reset] key Press to clear all settings (except programmed
settings) entered in the control panel and touch
panel.
8 [Interrupt] key Press to enter Interrupt mode. While the ma-
chine is in Interrupt mode, the indicator on the
[Interrupt] key lights up in green and the mes-
sage “Now in Interrupt mode.” appears on the
touch panel. To cancel Interrupt mode, press
the [Interrupt] key again.
9 [Power] (auxiliary power) key Press to turn on and off machine operations, for
example, for copying, printing or scanning.
When turned off, the machine enters a state
where it conserves energy.
10 [Stop] key Press the [Stop] key during copying to stop the
copy operation.
11 [Start] key Press to start copying. When this machine is
ready to begin copying, the indicator on the
[Start] key lights up in green. If the indicator on
the [Start] key lights up in orange, copying can-
not begin.
Press to restart a stopped job. For details on
jobs, refer to “Job List screens” on page 4-21
12 Main Power indicator Lights up in green when the machine is turned
on with the main power switch
13 [Proof Copy] key Press to print a single proof copy to be checked
before printing a large number of copies. (See
page 4-5)
14 Keypad Use to type in the number of copies to be pro-
duced.
Use to type in the zoom ratio.
Use to type in the various settings.
15 [C] (clear) key Press to erase a value (such as the number of
copies, a zoom ratio, or a size) entered using the
keypad.
16 [Mode Check] key Press to display screens showing the specified
settings.
17 [Utility/Counter] key Press to display the Utility/Counter screen.
18 [Mode Memory] key Press to register the desired copy settings as a
program or to recall a registered copy program.
(See page 4-8)
19 Contrast dial Use to adjust the contrast of the touch panel.
20 [Enlarge Display] key Press to enter Enlarge Display mode.
21 [Accessibility] key Press to display the screen for specifying user
accessibility functions.
No. Part name Description