Konica Minolta bizhub 282 - Manual (Page 408)

Utility mode 11
362/282/222 11-67
Utility mode
Ch
apt
er
11
2
Touch [Unlock].
The Unlock screen ap-
pears.
3
Select the button for the
operation to be set so
that the access lock is
no longer applied, and
then touch [Enter].
– If no options corre-
sponding to the but-
tons are installed, no
buttons appear. If
users are not regis-
tered, [User Authen-
tication] does not
appear.
The Security Setting screen appears again.
2
Note
If the password is not authenticated, even after the operation has been
set so that the access lock is no longer applied, restart the machine.
The access lock can be canceled by turning the machine off, then on
again with the main power switch.
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The ma-
chine may not operate correctly if it is turned on immediately after being
turned off.