6 operation precautions, Power source, Operating environment – Konica Minolta bizhub 282 User Manual
Page 49: Storage of copies, Operation precautions -18
1
Installation and operation precautions
1-18
362/282/222
In
sta
llat
ion
a
nd
o
per
at
ion
p
re
c
a
u
ti
on
s
Chapter 1
1.6
Operation precautions
To ensure the optimum performance of this machine, observe the precau-
tions described below.
Power source
The power source requirements are as follows.
-
Voltage fluctuation: Maximum ±10% (at 120 V/220-240 V AC)
-
Frequency fluctuation: Maximum ±2.5 Hz (at 50 Hz/60 Hz)
–
Use a power source with as little voltage or frequency fluctuations as
possible.
Operating environment
The environmental requirements for correct operation of the machine are as
follows.
-
Temperature: 50°F (10°C) to 89.6°F (32°C) with fluctuations of no more
than 18°F (10°C) within an hour
-
Humidity: 15% to 85% with fluctuations of no more than 20% within an
hour
-
However, in an environment with a temperature of 89.6°F (32°C), main-
tain a relative humidity of 65% or less.
Storage of copies
To store copies, follow the recommendation listed below.
-
Copies that are to be kept for a long time should be kept where they are
not exposed to light in order to prevent them from fading.
-
Adhesive that contains solvent (e.g., spray glue) may dissolve the toner
on copies.
-
Color copies have a thicker layer of toner than normal black-and-white
copies. Therefore, when a color copy is folded, the toner at the fold may
peel off.