Konica Minolta bizhub 25e - Manual (Page 98)

1
2
3
4
Operating on control panel
Setting the print controller 4-9
Function Description Settings
CR / LF Set the operation to perform when CR / LF is
received. (Only available for PCL5) CR / LF only
CR + LF / LF only
CR only / LF + CR
CR + LF / LF + CR
Form Lines Sets the number of lines that can be printed
on a single page. (Only available for PCL5) Auto
Manual (5 to 128)
*1 This item is only displayed when it is installed in the machine.
*2 The font pitch and font size settings may not be available, depending on the font that is set.
NOTE
Underlined values are the default settings specified at the time of shipment.