Konica Minolta bizhub PRESS C1100 - Manual (Page 154)

Parameter Option Description
Setup Setup Provides the following options:
● Emulation—This option defines the characteristics of
the IPDS printer emulated by the IC-312 print controller.
When the host inquires to determine which IPDS printer
is connected, the IC-312 print controller reports this
value to the host in a device reply. Certain emulations
are used for more than one printer. The default option is
4322. This is used for the majority of emulations,
including that of the IBM 4400 Thermal Printer as well as
all other IBM Infoprint printers not listed explicitly in this
option. The IPDS Resolution can be set to 240, 300,
480, or 600 dpi for the 4322 emulation.
Note: For many of the emulations, the resolution is
limited by the printer, and the IPDS Resolution is
ignored.
● IPDS Resolution—This option specifies the press
supported resolution. You can select: Auto, 240, 300,
480, or 600.
● Valid printing area—Select Border, Move, Edge, or,
Fit
● Report to host on—To control the exceptions and
intervention reporting, select from the following options:
○ VPA Exception
○ Undefined character exception
○ Intervention required
IPDS data traces Enables you to Save IPDS traces.
General Defaults Default code page The selected code page is used as the default character
encoding for the job, unless the IPDS stream already
contains a code page.
Default font The selected font is used as the default font for the job,
unless the IPDS stream already contains the fonts.
Default font size Enables you to set the default font size for the default font.
Font substitution Provides the following options:
● Relaxed—The IPDS host reports few exceptions
● Strict—The IPDS host reports when a font combination
that is requested by the IC-312 print controller is invalid.
IPDS trays
mapping IPDS trays
mapping Provides the following options:
● IPDS input tray mapping
● IPDS outnput tray mapping
144 Chapter 8—Production workflows