Konica Minolta bizhub PRESS C1100 - Manual (Page 47)

7. Collect the chart from the printer.
8. Place the chart on the i1iO calibration table making sure that it
is properly centered on the table and secured by the
electrostatic mat.
9. Click Next.
The Measure Calibration Chart window appears. In this step
you start to calibrate the i1iO spectrophotometer so that the
wizard can measure each separation and find the point at
which the toner appears on the paper.
Creating calibration tables with the X-Rite i1/i1iO/iSis spectrophotometer 37