Konica Minolta bizhub PRESS C1100 - Manual (Page 196)

Parameter Option Description
Text/graphics
halftone screen Provides the following options:
Note: If you select the Dot 2, Line 1 or Line 2 option for a job that
will be printed, make sure that you also select Permission in the
Image Quality Setting screen on the printer's touch panel.
● Same as for image—Applies the screen that is selected in the
Image screening list
● Dot 1—Applies a high dot-type screen
● Dot 2—Applies a medium dot-type screen
● Line 1—Applies a high line-type screen
● Line 2—Applies a medium line-type screen
● Stochastic—Stochastic screening differs from conventional
halftone screening in that high ink density results in more dots,
not bigger dots. Low ink density produces fewer dots, not
smaller dots. As stochastic screening involves millions of
minuscule dots, many more than are used for conventional
halftone screening.
Notes:
● If the Stochastic option is selected, make sure that the Text
Thinning, Text Smoothing, and Halftone Text Enhancement
options are not selected and that the Resolution option is set to
600 dpi.
● If the Resolution option is set to 1200 dpi, make sure that
Image screening and Text/graphics screening options use
the same settings.
186 Chapter 11—Job parameters