Konica Minolta bizhub C200 - Manual (Page 20)

C200 1-9
Specifying network settings 1
12
Touching [OK] displays the following screen. To apply the new settings, turn the machine off, then on
again.
2
Reminder
When turning the machine off, then on again, wait about 10 seconds to turn the machine on after turning
it off. The machine may not operate correctly if it is turned on immediately after being turned off.
1.3.3 DNS Settings
Parameters
Specifying the settings
1
In the Network Settings screen, touch [DNS Settings].
2
To use the DNS server, touch [YES]. To not use the DNS server, touch [NO].
– If [YES] was selected, continue with step 3.
– If [NO] was selected, touch [OK].
3
Touch [Host Name].
Parameter Description
DNS Settings Select whether or not DNS (Domain Name System) is used.
If a DNS server is being used in the network, select "YES". If one is not being used, select
"NO".
If an external server, such as an Internet provider, is being used and the IP address of the
mail server is publicly disclosed, select "NO". If only the DNS name of the mail server is
publicly disclosed, but the IP address is not publicly disclosed, select "YES".
For information on the network environment, consult with the network administrator.
Host Name Specify the host name of the machine.
Specify only if "DNS Settings" is set to "YES".
Domain Name Specify the domain name for the DNS server.
Specify only if "DNS Settings" is set to "YES".
DNS Server Address Specify the IP address of the DNS server.
Specify only if "DNS Settings" is set to "YES".