Konica Minolta bizhub C200 - Manual (Page 74)

C200 2-25
Specifying machine functions (software switch settings) 2
2.5.7 Specifying settings for administrator forwarding (mode 024)
Specify whether or not transmitted originals are forwarded to the recipient specified as the administrator.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
2
Note
Bits 6, 5 and 4 are available only if bit 7 was set to "1" (Forwarded).
3 Specify whether or not an image of the transmitted docu-
ment is added to the results report. 0 Is not added
1 Is added
2-0 − 000 *Do not change the settings
for these bits.
Bits Description Settings Details
Bits 7654 3210
Settings 1101 0001 (HEX: D1)
Bits Description Settings Details
7 Specify whether or not transmitted originals are forwarded to
the recipient specified as the administrator. 0 Not forwarded
1 Forwarded
6 Specify whether or not originals are forwarded to the admin-
istrator during scan transmissions. 0 Not forwarded
1 Forwarded
5-4 Specify the conditions for printing the result report when
originals are forwarded to the administrator.
(If the forwarding destination is a computer, the result report
is not printed, regardless of the setting specified here.) 00 Not printed
01 If transmission failed
10 If printed normally
11 *Do not specify these set-
tings.
3-0 − 0001 *Do not change the settings
for these bits.