Konica Minolta bizhub C200 User Manual
Page 38
C200
1-27
Specifying network settings
1
4
Use the keypad to type in the server address, and then touch [OK].
–
To specify a host name, touch [Host Name], and then type in the host name for the LDAP server.
–
The IP address cannot be specified to begin with "0.", "127"., or a number greater than "224".
–
To enter a number with less than 3 digits, touch [
→] to move the cursor to the next number.
–
[Host Name] appears only when "DNS Settings" is set to "YES".
5
In Setting Up LDAP screen 1/4, touch [SSL Setting].
6
Touch [ON] to use SSL or touch [OFF] to not use SSL, and then touch [OK].
7
In Setting Up LDAP screen 1/4, touch [Port Number].
8
Use the keypad to type in the port number, and then touch [OK].
–
To return to the default setting, touch [Default].
–
The default port setting differs depending on the setting specified for "SSL Setting".
ON: 636
OFF: 389
9
In Setting Up LDAP screen 1/4, touch [
↓].
Setting Up LDAP screen 2/4 appears.