Specifying settings in setting up ldap screen 3/4 – Konica Minolta bizhub C200 User Manual
Page 40
C200
1-29
Specifying network settings
1
Specifying settings in Setting Up LDAP screen 3/4
1
Touch [Login Name].
–
If "anonymous" was selected as the authentication method, it is not necessary to specify the login
name and password.
2
Type in the login name, and then touch [OK].
–
A maximum of 64 characters can be entered.
3
In Setting Up LDAP screen 3/4, touch [Password].
4
Touch [New Password], type in the password, and then touch [OK].
–
A maximum of 32 characters can be entered.
5
Touch [Confirm New Password], type in the password again, and then touch [OK].
6
When the Change Password screen appears again, touch [OK].
–
If the password was entered incorrectly, the message "Enter correct password." appears. Touch
[OK], and then type in the correct password.
7
In Setting Up LDAP screen 3/4, touch [
↓].
Setting Up LDAP screen 4/4 appears.