10 frame type set, Parameters, Specifying the settings – Konica Minolta bizhub C200 User Manual
Page 43: P. 1-32
C200
1-32
Specifying network settings
1
1.3.10
Frame Type Set
2
Note
Specify the settings necessary for this machine to connect to the NetWare server in order to use the
printing functions.
Parameters
Specifying the settings
1
In the Network Settings screen, touch [Frame Type Set].
2
Select the frame type, and then touch [OK].
3
Touching [OK] displays the following screen. To apply the new settings, turn the machine off, then on
again.
2
Reminder
When turning the machine off, then on again, wait about 10 seconds to turn the machine on after turning
it off. The machine may not operate correctly if it is turned on immediately after being turned off.
Parameter
Description
Frame Type Set
Specify the frame type according to the NetWare environment that this machine is con-
necting to.