When smtp authentication is used, When smtp authentication is used -35 – Konica Minolta bizhub C200 User Manual
Page 46
Advertising
C200
1-35
Specifying network settings
1
10
To change the port number, use the keypad to type in the number of the port receiving communication
results, and then touch [OK].
–
To return to the default setting, touch [Default].
–
After changing the port number, the machine must be turned off, then on again.
11
Touch [OK] in each screen until the initial screen appears.
When SMTP authentication is used
1
In the Network Settings screen, touch [IP Relay Settings].
2
Touch [IP Relay Destination Registration].
3
Touch the button for the number where the relay station is to be registered.
4
Touch [SMTP Authentication User Name].
5
Type in the SMTP authentication user name, and then touch [OK].
6
Touch [SMTP Authentication Password].
Advertising