Konica Minolta bizhub C200 - Manual (Page 79)

C200 2-30
Specifying machine functions (software switch settings) 2
2.5.14 Specifying settings for receiving long documents (mode 301)
Specify how to print long documents that are received. The received document can be automatically reduced
or the excess can be discarded.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
2
Note
The default settings for bits 4, 3 and 2 are shown below.
North American model: 110
European model: 101
Maximum length that is discarded:
When the received document is longer than the printable area of the paper, if the excess is shorter than the
length specified here, it is discarded. (If it is longer, the document is either reduced or split onto different
pages.)
- If the excess is less than the maximum discarded length, it is discarded, regardless of whether bit 1 is
set to "1" or "0".
- The document is reduced if the excess fits within the reduction ratio range specified by bits 4, 3 and 2
when bit 1 is set to "0".
- The excess is printed on a separate page if it does not fit within the reduction ratio range specified by
bits 4, 3 and 2 when bit 1 is set to "0". If bit 1 is set to "1", the excess is printed on a separate page.
Bits 7654 3210
Setting (North American model) 0001 1001 (HEX: 19)
Setting (European model) 0001 0101 (HEX: 15)
Bits Description Settings Details
7-5 Specify the maximum length that is discarded. 000 0 mm
001 8 mm
010 12 mm
011 14 mm
100 18 mm
101 20 mm
110 24 mm
111 *Do not specify these set-
tings.
4-2 Specify the maximum reduction ratio. 000 100%
001 95%
010 90%
011 85%
100 80%
101 65%
110 60%
111 *Do not specify these set-
tings.
1 Specify the process that is performed on the trailing end. 0 Order of priority: Discarded
→ Reduced → Split
1 Order of priority: Discarded
→ Split
0 − 1 *Do not change the setting
for this bit.