Konica Minolta bizhub C200 - Manual (Page 88)

C200 2-39
Specifying machine functions (software switch settings) 2
2.5.28 Specifying settings concerning the Direct Input tab and broadcast transmissions
(mode 476)
Specify whether or not the Direct Input tab is displayed, and whether or not broadcast transmissions are
permitted.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
2.5.29 Specifying settings for registration permissions, for displaying destination
information for one-touch dial buttons, and for the setting confirmation screen with
broadcast transmissions (mode 477)
Specify the registration permissions for one-touch dial buttons and fax programs, how destination
information registered with one-touch dial buttons is displayed, and whether or not the setting confirmation
screen for broadcast transmissions is displayed.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits 7654 3210
Settings 0000 0000 (HEX: 00)
Bits Description Settings Details
7-4 − 0000 *Do not change the settings
for these bits.
3 Specify whether or not the Direct Input tab is displayed. 0 Displayed
1 Not displayed
2 Specify whether or not broadcast transmissions are permit-
ted. 0 Permitted
1 Not permitted
1-0 − 00 *Do not change the settings
for these bits.
Bits 7654 3210
Settings 0000 0001 (HEX: 01)
Bits Description Settings Details
7 − 0 * Do not change the setting
for this bit.
6 Specify if one-touch dial buttons are registered and reports
are printed in Administrator mode instead of in User mode. 0 Specified in User mode
1 Specified in Administrator
Mode
5 Specify whether or not the telephone numbers of destina-
tions registered with one-touch dial buttons appear in
screens or reports. 0 Not displayed
1 Displayed
4-2 - 000 * Do not change the setting
for this bit.