Avaya Integral 3 / 5 FC1 - Manual (Page 15)

Getting to know your handset Integral 5
15
Commissioning
continued
Setting up the charger
Place the charger on a smooth stable surface, such as on a table. Select
a place that is away from direct sunlight and from damp.
Attention: The plug-in power supply units for the charger and charger Plus
must not be interchanged.
• Insert the small jack on the connection cable into the back of the charger.
• Insert the mains plug into a socket.
The charger is now ready for operation.
Charging the handset
Simply place the handset into the charger. You will hear an acknowledge-
ment tone. Your handset will remain switched on or off. The battery symbol
in the symbol bar ’moves’ until the battery is completely full.
If the battery cannot be charged, because, for example, it is faulty, a war-
ning tone sounds every 15 seconds.
While recharging the battery will become somewhat warm to the touch.
This is normal.
Charger
Charger Plus