Xerox Stampante Xerox 8830 con AccXES Controller serial number N5T-16835 - Manual (Page 8)

XES FEATURE KEY INSTRUCTIONS
701P39462 12/02 Page 8
9. Enter the Advanced Network HW Address or Scanner
Hardware Address a second time and click “Confirm.”
10. Fill in the requested name and addressing information and click
“Continue.”
11. After submitting the information, verify that all information on
the Summary Page is correct then click on the “Download
Feature Key (file)” button. A “File Download” dialog box will
appear, click ”Save”. A “Save As” window will open. Choose
the location (Save In:) to save the file, and change the file
name if you desire. Click “Save” to save the file to your hard
drive location or to the diskette that came in this kit. Close the
“Download Complete” window.
Note: You may want to rename the file to a meaningful name, but
do not change the file extension (.plt, .xky). Changing the file name
will not affect the system’s ability to read the file.
12. Upload the key file(s) to the Controller using the Web PMT.
•
Open the WebPMT on your workstation
•
Navigate to PRINTER DEFAULTS > UTILITIES > Upload
File.
•
Browse to where you saved the Feature Key file in Step 11
and click on the Upload button to upload the file.
Note: The AccXES Client Tools, Document Submit Tool can also
be used (Reference the AccXES Client Tools User Guide). Send
the key file(s) the same as you would send a print job. The
Controller will recognize the file extension and load the key(s).
13. After waiting 60 seconds, reboot your entire system to enable
the feature key. Wait for the system to complete the reboot and
is ready to accept prints.
Note: If required, reference the XES Synergix
8825/8830/8850/8855 Digital Solutions User Guide, Powering Off
the Digital Solution or Colorgrafx X2 User Guide, for reboot
instructions.