Allstar Products Group MVP-SQ - Manual (Page 18)

Wiring Diagram
110796
2. Close Pushbutton — Green-backlighting, arrow
pointing down. Used to start the door downward.
This button has no effect on a door in motion. Will
allow constant pressure close operation if the
photocell is misaligned.
3. Stop Button - Red-backlighting, universal “STOP”
within an octogon. Used to stop a door in motion.
This button has no effect on a door that is stopped.
4. Light Pushbutton —Yellow-backlighting, “Sun”
symbol. Turns the opener light on and off, but does
not activate the door operator. The opener light will
stay on until turned off using this pushbutton, or
until door operation is initiated, which overrides the
function of this pushbutton and automatically turns
the light off after 4-1/2 minutes.
5. Security Switch — Prevents unwanted door
operation from pushbutton, key switches, keyless
entry systems, radio controls, etc. When the
Security Switch is moved to the ON position
(towards “locked” symbol), with the garage door
fully closed, signals from all of these devices are
locked out by the opener. Such devices will
continue to work until the door is fully closed,
allowing you to set the switch (when leaving on
vacation, for example), leave the garage and close
the door remotely.
(NOTE: YOU WILL NOT BE ABLE TO OPEN
YOUR GARAGE DOOR USING RADIO
CONTROLS OR EXTERIOR ACCESS CONTROLS
UNTIL THE SECURITY SWITCH IS RETURNED
TO THE OFF POSITION (“unlocked” symbol). THIS
MUST BE DONE FROM INSIDE THE GARAGE.)
When the Security Switch is engaged, the green
lighting behind the Open/Close Pushbuttons is
extinguished as an indication.
6. Security Disable Switch - located under and to the
left of the Security Switch. Disables the Security
Switch feature. Use if the garage door is the only
entryway to the garage.
Learn Enable Button - Located inside a small hole
on the front face of the Security Switch. Allows
programming of a radio transmitter. See
“Programming the Radio System” on page 11 for
button features and restrictions. Use a pin or pointed
object to activate (such as a paper clip straightened
out)..
OPERATION AND ADJUSTMENT INSTRUCTIONS
18
104394
OPEN
Button
CLOSE
Button
Security
Disable
Switch
STOP
Button
Security
Switch
Learn
Enable
Button
Light
Button