Xerox WorkCentre PE120-120i-3124 - Manual (Page 264)

Installing Machine Options D.4
7 Replace the control board cover.
8 Reconnect the power cord and printer cable, and turn the
machine on.
N OTE : After installing the memory DIMM, you need to select it in
the printer properties of the PostScript printer driver so that
you can use it with your machine (WorkCentre PE120i only):
1. Make sure that the PostScript printer driver is installed in your
computer. For details about installing the PS printer driver, see
page B.2.
2. Click the Windows Start menu.
3. For Windows 95/98/Me/NT 4.0/2000, select Settings and then
Printers.
For Windows XP, select
Printers and Faxes.
4. Select the Xerox WC PE120 Series PS printer.
5. Click the right mouse button on the machine icon and select
Properties.
6. For Windows 95/98/Me, select Device Options tab.
For Windows NT 4.0/2000/XP, select Device Settings tab.
7. Select the memory DIMM you installed in from Printer
Memory in the Installable Option section and click OK.
For Windows 98, select
Installable Option → VMOption →
change setting for:VMOption → change memory .