Xerox WorkCentre PE120-120i-3124 - Manual (Page 268)

Installing Machine Options D.8
Setting Tray 2 in the Printer Properties
If you installed Tray 2 with your machine on, the machine does
not recognize it. In this case, you need to set the tray in the
printer properties window so that you can use it for PC printing.
The procedure for setting the tray may differ depending on the
selected printer driver.
To set the tray in the printer properties of the PCL 6 printer
driver:
1 Click the Windows Start menu.
2 For Windows 98/Me/NT 4.0/2000, select Settings and then
Printers
.
For Windows XP, select Printers and Faxes.
3 Select the Xerox WC PE120 Series PCL 6 icon.
4 Click the right mouse button on the machine icon and select
Properties
.
5 Click the Printer Configuration tab, and select Tray 2
from the Optional Tray drop-down list.
6 Click OK.
To set the tray in the printer properties of the PostScript printer
driver (WorkCentre PE120i only).
1 Click the Windows Start menu.
2 For Windows 95/98/Me/NT 4.0/2000, select Settings and
then Printers.
For Windows XP, select Printers and Faxes.
3 Select the Xerox WC PE120 Series PS machine icon.
4 Click the right mouse button on the machine icon and select
Properties.
5 Click the Device Settings tab, and select Installed from
the Tray2 drop-down list.
6 Click OK.