Xerox WorkCentre PE120-120i-3124 - Manual (Page 72)

Paper Handling 3.6
In the Bypass Tray
The Bypass tray can hold several sizes and types of print
material, such as transparencies, postcards, note cards, and
envelopes. It is useful for single page printing on letterhead or
colored paper. You can load approximately 50 sheets of plain
paper, 5 envelopes, 5 transparencies, 5 sheets of card stock, or
5 labels at a time.
To load print material in the Bypass tray:
1 Lower the Bypass tray and unfold the paper support
extension, as shown.
2 If you are using paper, flex or fan the edge of the paper
stack to separate the pages before loading.
For transparencies, hold them by the edges and avoid
touching the print side. Oils from your fingers can cause
print quality problems.