Accton Technology Edge-corE 24-Port Gigabit Ethernet Lite Switch ES4324 - Manual (Page 20)

Introduction
1-4
1
Power Supply Socket
The power socket is located on the rear panel of the switch. The standard power
socket is for the AC power cord.
Figure 1-4 Power Supply Socket
Features and Benefits
Connectivity
• 24 10/100/1000 Mbps ports for easy Gigabit Ethernet integration and for protection
of your investment in legacy LAN equipment.
• Auto-negotiation enables each RJ-45 port to automatically select the optimum
communication mode (half or full duplex) if this feature is supported by the
attached device; otherwise the port can be configured manually.
• RJ-45 10/100/1000BASE-T ports support auto MDI/MDI-X pinout selection.
• Unshielded (UTP) cable supported on all RJ-45 ports: Category 3 or better for
10 Mbps connections, Category 5 or better for 100 Mbps connections, and
Category 5, 5e, 6 or better for 1000 Mbps connections.
• IEEE 802.3-2005 Ethernet, Fast Ethernet, and Gigabit Ethernet.
Expandability
• Four Small Form Factor Pluggable (SFP) transceiver slots (shared with
1000BASE-T ports)
• Supports 1000BASE-SX, 1000BASE-LX and 1000BASE-LH SFP transceivers.
Performance
• Transparent bridging.
• Provides store-and-forward switching.
• Jumbo-Frame up to 9,6 Kbytes
• Supports flow control
• Broadcast storm control
100-240V ~50-60Hz 0.8A