Application examples, Collapsed backbone, Figure 2-1 – Accton Technology Edge-corE 24-Port Gigabit Ethernet Lite Switch ES4324 User Manual
Page 24: Network planning 2-2, Figure 2-1 collapsed backbone
Network Planning
2-2
2
Application Examples
The switch is not only designed to segment your network, but also to provide a wide
range of options in setting up network connections. Some typical applications are
described below.
Collapsed Backbone
The switch is an excellent choice for mixed Ethernet, Fast Ethernet, and Gigabit
Ethernet installations where significant growth is expected in the near future. In a
basic stand-alone configuration, it can provide direct full-duplex connections for up
to 24 workstations or servers. You can easily build on this basic configuration,
adding direct full-duplex connections to workstations or servers. When the time
comes for further expansion, just connect to another hub or switch using one of the
Gigabit Ethernet ports built into the front panel, a Gigabit Ethernet port on a plug-in
SFP transceiver.
In the figure below, the 24-port switch is operating as a collapsed backbone for a
small LAN. It is providing dedicated 10 Mbps full-duplex connections to
workstations, 100 Mbps full-duplex connections to power users, and 1 Gbps
full-duplex connections to servers.
Figure 2-1 Collapsed Backbone
Servers
1 Gbps
Workstations
100 Mbps
Workstations
10 Mbps
...
...
...
1
2
3
4
13
14
15
16
5
6
7
8
17
18
19
20
9
10
11
12
21
22
23
24
21
22
23
24