Smart Technologies 800i5e-SMP - Manual (Page 61)

Chapter 6: Maintaining your interactive
whiteboard system
Maintaining your interactive whiteboard 49
Cleaning the projector 49
Focusing and adjusting the projector image 50
Replacing the projector lamp 51
Removing and replacing the projector lamp module 51
Resetting the lamp hours 55
This chapter includes methods for properly cleaning and preventing damage to your
SMART Board 800i5e-SMP interactive whiteboard system with appliance.
Maintaining your interactive whiteboard
For information on maintaining your interactive whiteboard, see the SMART Board 800 series
interactive whiteboard user’s guide ( smarttech.com/kb/144817 ).
Cleaning the projector
W A R N I N G
Cleaning a wall-mounted projector can result in a fall or injury. Use caution when climbing a ladder,
and consider removing the projector from its wall-mounting bracket to clean it.
C A U T I O N
l
Never touch the mirror with your hands or a brush, and do not scrub the surface of the mirror
with the supplied cleaning cloth. Instead, use the supplied cleaning cloth to clean the mirror
with a light touch, and do not put any cleaning solvents on the cloth or the mirror. Do not
apply pressure to the projector lens or mirror.
Chapter 6
49