Alloy Computer Products NS-24T01FS - Manual (Page 16)

10
24-Port 10 /100Mbps Ethernet S mart Switch
SYSTEM FD X
POWER Link/ACT FX
Figure 2. Mount the Switch in the rack
Connecting Network Cable
The Switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet
and it runs both in half and full duplex modes.
These ports are Auto-MDI type port. The Switch can auto
transform to MDI-II or MDI-X type, so you can just make an
easy connection that without worrying if you are using a standard
or crossover cable.
AC Power
The Switch can be used with an AC power supply of 100~240V
AC, 50~60 Hz. The power switch is located at the rear of the unit
adjacent to the AC power connector and the system fan. The
switch’s power supply will adjust to the local power source