Alloy Computer Products NS-24T01FS - Manual (Page 22)

16
„ Parity: none
„ Stop bits: 1
„ Flow control: None
Make sure the terminal or PC you are using to make this
connection is configured to match these settings.
For example, run the Hyperterminal program packaged with
Windows 98/ME/2000/XP, the process will procede as follow:
Step 1. Click Start Accessories Communications Hyper
Terminal (Figure 6), and then the Connection Description
screen will be shown as Figure 7.
Figure 6. Start Hyper Terminal function
Step 2. Enter a name in the blank to set up a new connection,
and then press OK.