Acumen Stopwatch - Manual (Page 100)

General Precautions
Do not operate buttons under water
Although your monitor is water resistant, be sure that you do not operate
the buttons under water as pressure can cause them to leak.
Dry off watch after use
Moisture can affect the Temperature and Heat Index reading. Please dry
off your watch after use.
Dry off transmitter after use (Optional)
The transmitter will automatically shut itself off once you have removed it
from your chest. However, it is important to thoroughly dry it off after
every use since moisture on the electrodes can cause it to remain on
longer.
Electrode precautions (Optional)
Be sure not to excessively twist or bend the electrode portions of the
chest transmitter (never bend backwards), especially when storing it. This
can permanently damage their conductivity and cause mechanical
damage to the internal circuit.
Global Reset
If your monitor should ever get stuck or act erratically due to dropping it,
static shock or some other unforeseen reason, this feature will allow you
to reset the unit and return all settings back to their internal defaults. To
perform this function, press and hold four buttons together for 3 seconds
under any mode (display dual LCD). The unit will automatically clear and
return to setting mode.
Part IV
96