Acumen Stopwatch - Manual (Page 16)

12
Part I
/STP/RESET/ Button C
- Press momentarily to stop the stopwatch; to decrease the digits in the
Setting Mode (press and hold to change it fast).
- Press & hold for 3 seconds in the Recall Data Mode to enter clear data
mode when the stopwatch is stopped.
- Press & hold for 3 seconds in the Recall Data Mode to enter the Basic
Setting Mode while there no data in watchís memory and the stopwatch
is stopped.
- *Press & hold for 3 seconds in the Chrono Mode to activate/deactivate
the out of zone alarm when the stopwatch is running or reset.
MODE/NXT Button D
- Press momentarily to change modes; to proceed to the next item in the
setting mode.
Note: All buttons produce one short beep when pressed. Press and hold
operation also produces another beep. When the daily alarm is beeping, it
can be silenced by pressing any botton.
/STR/LAP Button B
- Press momentarily to start the stopwatch; to increase the digits in the
setting mode (press and hold to change it fast)