Part ii – Acumen Stopwatch User Manual
Page 54
Advertising
50
Part II
The "
" represents time segments. Each blinking segment means 1/9
of your goal time has been reached. When the total goal time is reached,
the watch will give four beeps and the display will flash your goal time for
10 seconds. (You can view the In-Zone-Goal Count Down Timer display
in the Recall Data Mode).
3. Drink Interval Timer Alarm
The watch will remind you to drink during exercise by giving a long beep
and flash with the amount of fluid loss for 10 seconds. Note: You must set
the Drink Interval Timer to ON and have the stopwatch running. (You
can set the Drink Interval Timer under the Fluid Check
TM
Mode refer to page
36.)
LAP
In-Zone-Goal Count
Down Timer Segments
Advertising